Home
Manuals
Checklists
Advisory Publications
Specifications
Avionics
Panel
Moving Day
Links
Data Logs
Screenshots - Leaning
Screenshots - Iignition Stress Test
Intake Yarn Check

Carbon Monoxide Detector

N11HC
Glasair Super II-S FT

Pocket CO Operation:

Other Information:

Pocket CO 300 Manual

This in PDF or DOCX

Data Sheet

Notes:

Wait for the back light to turn on after first push before continuing with more pushes.

Vibrator is turned off

50 PPM Alarm is turned off

·         Turn On                                   Push & Release button once
                                                Will stay on for 12 hours or until turned off

Turn Off                                  Push & Release then
                                                Push & hold for 2 seconds (until red flash)

Alarm activates when:

125 – 399 PPM           Alarms every 10 seconds

> 400 PPM                  Alarms every 5 seconds

OAT <  32°F               Shows “COLD”

OAT > 122°F              Shows “HOT”

During Self test

 

To get Dosimeter Info IF On:  Push & Release twice

To get Dosimeter Info IF Off: Push & Release button 3 times

Codes:

TE – Total Exposure

TWA – Time Weighted Average

  MAX – Maximum concentration

  TIME – Elapsed Time after turn on that MAX occurred

RUN – Run time in minutes

 
Home ] Manuals ] Checklists ] Advisory Publications ] Specifications ] Avionics ] Panel ] Moving Day ] Links ] Data Logs ] Screenshots - Leaning ] Screenshots - Iignition Stress Test ] Intake Yarn Check ]